P84® Fibers - SOLIAO

About
P84® polyimide derived from aromatic dianhydrides and aromatic diisocyanates exhibits outstanding thermal stability. The polymer is non melting, has a glass transition temperature of 315°C. The fibres start to carbonize at temperatures beyond 370 °C. Due to the aromatic structure the polymer and fibres are inherent non flammable. A limiting oxygen index of 38 percent can be measured. P84 can be used to temperatures up to 260 °C depending on the environment. Fibre Properties Features of the P84 polyimide fibres are the irregularly lobed cross-section being responsible for the high bulk of the fibres. The typical mechanical fibre data describe that P84 is rather a textile fibre with good knot and loop strength properties. Because of the low modulus and the high elongation P84 polyimide fibres are not destined for typical “reinforcing” applications as p-aramid or carbon fibres.&&

About

P84® polyimide derived from aromatic dianhydrides and aromatic diisocyanates exhibits outstanding thermal stability. The polymer is non melting, has a glass transition temperature of 315°C. The fibres start to carbonize at temperatures beyond 370 °C. Due to the aromatic structure the polymer and fibres are inherent non flammable. A limiting oxygen index of 38 percent can be measured. P84 can be used to temperatures up to 260 °C depending on the environment. Fibre Properties Features of the P84 polyimide fibres are the irregularly lobed cross-section being responsible for the high bulk of the fibres. The typical mechanical fibre data describe that P84 is rather a textile fibre with good knot and loop strength properties. Because of the low modulus and the high elongation P84 polyimide fibres are not destined for typical “reinforcing” applications as p-aramid or carbon fibres.&&

Product Description
Supplier	Evonik
Generic	PI
Material Status	Commercial: Active
Features	Aromatic,Flame Characteristics,Heat Stabilized
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.41	g/cm³
Shrinkage rate
240℃，10 min	< 3.0	%

MECHANICAL	Nominal value	Unit	Test method
Tensile strain
fracture	30	%

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	315	℃	DSC

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Extreme oxygen index	38	%

Supplementary information	Nominal value	Unit	Test method
Tenacity	4.29	g/denier

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.