| About |
|---|
| Product Description | |
|---|---|
| Supplier | Zig Sheng |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | High liquidity,Low Viscosity |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Volume Rate | 102.1 | cm³/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 71.4 | MPa | ASTM D-638 |
| Tensile strain | 77.7 | % | ASTM D638 |
| bending strength | 119.3 | MPa | ASTM D790 |
| Bending modulus | 3197.0 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | 69.1 | ℃ | ASTM D648 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 225 | ℃ | |
| Relative viscosity | 2.422 | ASTM 1254403-D3-050 | |
| Obtainable item | 0.34 | % | ASTM 1254403-D3-047 |
| water content | 345 | ppm | ASTM 1254403-D3-022 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| -30℃ | 65.7 | J/m | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |