| About |
|---|
| Product Description | |
|---|---|
| Generic | PA6 |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Rockwell hardness | 72.2 | ASTM D785 | |
| bending strength | 86.6 | MPa | ASTM D790，ISO 178 |
| 2087 | MPa | ASTM D790/ISO 178 | |
| Tensile strain | |||
| fracture | 148.1 | % | ASTM D638，ISO 527 |
| tensile strength | 60.7 | MPa | ASTM D638，ISO 527 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 20.1 | J/m | ASTM D256，ISO 179 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Water absorption rate | |||
| 23℃/24H | ＜0.07 | % | ASTM D570，ISO 62 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 2.85 | g/10min | ASTM D1238，ISO 1133 |
| Shrinkage rate | 0.93 | % | ASTM D955 |
| Density | 1.156 | g/cm³ | ASTM D792，ISO 1183 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 215-220 | ℃ | – |
| Hot deformation temperature | |||
| Unannealed | 71 | ℃ | ASTM D648，ISO 75 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 2.4E+13 | ohms | ASTM D257，IEC 60093 |
| Volume resistivity | 1.5×10^14 | ohms·cm | ASTM D257，IEC 60093 |
| Dielectric constant | |||
| 1 MHz | 0.65 | ASTM D150，IEC 60250 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |