PA66 EPR24 - SOLIAO

About
通用级。有光、高粘度产品。用于注塑及成型挤出，还可用于不同用途的复丝挤出。作为改性基料，特别适宜于阻燃改性。

Product Description
Generic	PA66
Material Status	Commercial: Active
Features	High Viscosity
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Relative viscosity	3.20±0.10		GB/T 12006.1
water content	<600	ppm	GB/T 12006.2

MECHANICAL	Nominal value	Unit	Test method
tensile strength	75	MPa	ISO 527
Tensile strain	30	%	ISO 527
Bending modulus	2500	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of simply supported beam (23 ° C)
Gap	2.5	kJ/m²	ISO 179
No gap	NB	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa	65	℃	ISO 75
melting point	260	°C	ISO 11357

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
0.80 mm	V-2		UL 94

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.