| About |
|---|
| Product Description | |
|---|---|
| Supplier | TEIJIN |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Low Light Diffusion,Flame Characteristics |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Shrinkage rate | |||
| MD | 0.5~0.7 | % | |
| TD | 0.5~0.7 | % | |
| Density | 1.20 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 300℃，1.2 kg | 18 | cm³/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 60.0 | MPa | ISO 527-1-2 |
| yield | 61.0 | MPa | ISO 527-1-2 |
| Tensile strain | >90 | % | ISO 527-1-2 |
| Bending modulus | 2150 | MPa | ISO 178 |
| bending strength | 95 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy impact strength | >10 | KJ/m² | ISO179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Load deformation temperature (1.8 MPa) | 126 | ℃ | ISO 75-1 |
| Linear coefficient of thermal expansion | |||
| TD | 7E-5 | /℃ | ISO 11359-2 |
| MD | 7E-5 | /℃ | ISO 11359-2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |