| About |
|---|
| Panlite® SS系列通过对树脂分子的重新设计，使PC在保持原有透明性的基础上，低温高冲击性大幅提升。 可以使用在超过-30℃的极限低温环境的同时还需要透明性的用途。 具有普通PC所没有的拔水性和对碱性化学品、界面活性剂具有一定耐性，可以应用在全新的用途。 |
| Product Description | |
|---|---|
| Supplier | TEIJIN |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good flexibility,low-temperature impact resistance,Good coloring |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.2 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| TD：4.0 mm | 0.5~0.7 | % | |
| MD：4.0 mm | 0.5~0.7 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 58 | MPa | ISO 527-1-2 |
| fracture | 63 | MPa | ISO 527-1-2 |
| Tensile strain | |||
| fracture | >50 | % | ISO 527-1/2 |
| bending strength | 89 | MPa | ISO 178 |
| Bending modulus | 2200 | MPa | ISO 178 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa | 120 | ℃ | ISO 75-1/2 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Full light transmittance (2mmt) | 89 | % | ASTM D1003 |
| Haze | |||
| 2 mm | 0.6 | % | ASTM D1003 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 72 | kJ/m² | ISO 179 |
| -30℃ | 46 | kJ/m² | ISO 179 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |