| About |
|---|
| Product Description | |
|---|---|
| Supplier | TEIJIN |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good Clarity,Good coloring,low-temperature impact resistance |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 300℃，1.2 kg | 7 | kg/m³ | ISO 1133 |
| Density | 1180 | kg/m³ | ISO 1183 |
| Molding shrinkage | |||
| Parallel | 0.5-0.7 | % | |
| Vertical | 0.5-0.7 | % | |
| OPTICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Light Transmission | 87 | % | ASTM D1003 |
| Haze | 1.4 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Modulus | 2100 | MPa | ISO 527 |
| Tensile Strength | |||
| Yield yld | 60 | MPa | ISO 527-2 |
| Broken BRK | 73 | MPa | ISO 527-2 |
| Flexural Strength | 90 | MPa | ISO 178 |
| Flexural Modulus | 2190 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 81 | kJ/m² | ISO 179 |
| -30℃ | 69 | kJ/m² | ISO 179 |
| Charpy Unnotch Impact strength | |||
| 23℃ | NB | kJ/m² | ISO 179 |
| -30℃ | NB | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.80 MPa | 124 | ℃ | ISO 75-1/-2 |
| 0.45 MPa | 136 | ℃ | ISO 75-1/-2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |