| About |
|---|
| Product Description | |
|---|---|
| Supplier | TEIJIN |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | High scratch resistance,Ammonium-tolerant |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.17 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 23℃，24hr | 0.1 | % | ISO 62 |
| Melt Volume Rate | |||
| 300℃，1.2 kg | 26 | cm³/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| bending strength | 100 | MPa | ISO 178 |
| Bending modulus | 2450 | MPa | ISO178 |
| Tensile strain | 90 | % | ISO527-1 |
| tensile strength | |||
| yield | 72 | MPa | ISO527-1 |
| fracture | 62 | MPa | ISO527-1 |
| Pencil hardness | H | JIS K5600 | |
| Rockwell hardness | |||
| M-level | 88 | ISO 2039-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa | 113 | ℃ | ISO 75-1 |
| 0.45 MPa | 126 | ℃ | ISO 75-1 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Full light transmittance (2mmt) | 90 | % | ASTMD1003 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 5 | kJ/m² | |
| 23℃ | NB | kJ/m² | |
| Charpy Notched Impact Strength | |||
| 23℃ | 5 | kJ/m² | ISO 179 |
| 23℃ | NB | kJ/m² | ISO 179 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |