| About |
|---|
| PAPETBIO is biomass derived Polyester resin. 30% Bio contents (30% Bio-MEG, 70% petro-based PTA) 20% CO 2 reductions comparing to petro-based PET (Petro-based PET’s CO 2 emission is 2.37kg CO 2 /kg PAPETBIO’s CO 2 reduction is 0.474kg/kg) Shows excellent mechanical properties and heat resistance.&& |
| Product Description | |
|---|---|
| Supplier | LOTTE |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Renewable resources,High Heat Resistance,Copolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Melting peak temperature | 245 to 251 | ℃ | ASTM D3418 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Diethylene Glycol | < 1.5 | wt% | Internal Method |
| Supplementary information | Nominal value | Unit | Test method |
|---|
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.39 to 1.41 | g/cm³ | ASTM D1505 |
| Acetaldehyde | < 1.0 | ppm | WI-QS-S07 |
| Color b | < 1.00 | ASTM D6290 | |
| Color L | > 80.0 | ASTM D6290 | |
| Intrinsic viscosity | 0.78 to 0.82 | dl/g | ASTM D4603 |
| water content | < 1000 | ppm | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |