PAXOTHENE® NA207-66

About
PAXOTHENE NA207-66 (LDPE) is a low density polyethylene resin with high melt index especially suitable for injection & extrusion molding. Owing to its excellent flowability, PAXOTHENE NA207-66 is suitable for films or bags with thickness of 0.010~0.040 mm. The said bags are for package of suit, bakery, fruit, vegetable, fish, meat, and grocery. PAXOTHENE NA207-66 is well formulated with slip and anti-block agents, bags made from said resin are easy to open and with outstanding gloss. This makes goods more attractive to customers. PAXOTHENE NA207-66 also could be injection molded into various parts, such as trunk of plastic trees, small parts for toy and stationery.&&

About

PAXOTHENE NA207-66 (LDPE) is a low density polyethylene resin with high melt index especially suitable for injection & extrusion molding. Owing to its excellent flowability, PAXOTHENE NA207-66 is suitable for films or bags with thickness of 0.010~0.040 mm. The said bags are for package of suit, bakery, fruit, vegetable, fish, meat, and grocery. PAXOTHENE NA207-66 is well formulated with slip and anti-block agents, bags made from said resin are easy to open and with outstanding gloss. This makes goods more attractive to customers. PAXOTHENE NA207-66 also could be injection molded into various parts, such as trunk of plastic trees, small parts for toy and stationery.&&

Product Description
Supplier	USI
Generic	LDPE
Material Status	Commercial: Active
Features	Good surface appearance,Smoothness,Good liquidity,High anti-blocking,Food contact compliance,Low density
Availabilitys	Asia Pacific
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.92	g/cm³	ASTM D792
Melt Flow Rate
	8.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	53		ASTM D2240

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion molding conditions	Nominal value	Unit	Test method
Drying temperature	50-70	°C
Drying time	2.0-4.0	Hr
Recommended moisture content	<=0.20	%
Barrel rear temperature	150-210	°C
Barrel middle temperature	170-220	°C
Barrel front temperature	180-230	°C
Nozzle temperature	190-240	°C
Mold temperature	30-70	°C
Drying temperature	50-70	°C
Drying time	2.0-4.0	Hr
Recommended moisture content	<=0.20	%
First zone temperature	130-190	°C
Zone 2 temperature	140-200	°C
Third zone temperature	150-210	°C
Fourth zone temperature	160-220	°C
Fifth zone temperature	170-230	°C
Die temperature	180-240	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.