PAXOTHENE® NA208

About
PAXOTHENE NA208 (LDPE) having excellent melt flow characteristic, high gloss, good toughness and stiffness, is especially used for injection molding applications requiring excellent appearance, medium toughness and stiffness, such as housewares, toys, Christmas light sockets or main stems of plastic trees, etc. The resin’s excellent melt flow characteristics permit short cycle time for economical moldings. PAXOTHENE NA208 can also be ground into powder for coating.&&

About

PAXOTHENE NA208 (LDPE) having excellent melt flow characteristic, high gloss, good toughness and stiffness, is especially used for injection molding applications requiring excellent appearance, medium toughness and stiffness, such as housewares, toys, Christmas light sockets or main stems of plastic trees, etc. The resin’s excellent melt flow characteristics permit short cycle time for economical moldings. PAXOTHENE NA208 can also be ground into powder for coating.&&

Product Description
Supplier	USI
Generic	LDPE
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,Good surface appearance,Good liquidity,Quick molding cycle,Low density
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D1505
Melt Flow Rate	22	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-60.0	℃	ASTM D746
Vicat Softening Temp	96.0	℃	ASTM D1525
Melting peak temperature	108	℃	ASTM D3418

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	53		ASTM D2240
tensile strength			ASTM D638
Yield, injection molding	12.6	MPa	ASTM D638
Fracture, injection molding	9.22	MPa	ASTM D638
Tensile strain
Fracture, injection molding	130	%	ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.