PBT 1403G3 - SOLIAO

About
UL 94 V-0，抗热变形佳，15%玻纤增强。线圈骨架、插件、开关、插座、继电器、车灯底座、连接器、O A风扇叶片、骨架、灯具外壳、热熔胶枪外壳、FBT增湿器等需要高强度，高电器条件，抗温的注塑成品用。

Product Description
Supplier	Nan Ya
Generic	polybutylene terephthalate
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
Electrical performance	Nominal value	Unit	Test method
Arc resistance	75	sec	ASTM D495
Insulation failure strength (3.2mm)	20	Kv/mm	ASTM D149

MECHANICAL	Nominal value	Unit	Test method
tensile strength	100	Mpa	ASTM D638
Bending modulus	5500	Mpa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Notch impact strength (3.2mm)	53.9	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa	195	℃	ASTM D648

PHYSICAL	Nominal value	Unit	Test method
Shrinkage rate
3.0 mm	0.4~1.4	%	ASTM D955
Density	1.50	g/cm³	ASTM D792

Process Conditions
injection molding	Nominal value	Unit	Test method
Nozzle temperature	235	℃
Barrel temperature – front section	240	℃
Barrel temperature – middle section	240	℃
Barrel temperature – rear section	250	℃
Mold temperature	80	℃
Injection pressure	40~50	MPa
Screw speed	80	rpm
Injection speed	最大

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.