| About |
|---|
| 注塑成型， 无卤阻燃 PC/PBT， 高抗冲，优良的耐化学性能， 优良的成型加工性能 |
| Product Description | |
|---|---|
| Supplier | Polysyron |
| Generic | PC+PBT |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High impact resistance,Halogen free,Solvent resistance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Shrinkage rate | 0.4~0.8 | % | ISO 294-4 |
| Density | 1.2 | g/cm³ | ISO 1183-1 |
| Melt Flow Rate | |||
| 265℃，5.0kg | 25 | g/10min | ISO1133 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | V0 | UL 94 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | 80 | ℃ | ISO 75-2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| bending strength | 85 | MPa | ISO 178 |
| Tensile strain | 80 | % | ISO 527 |
| tensile strength | 60 | MPa | ISO527 |
| Bending modulus | 2400 | MPa | ISO178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 60 | KJ/m² | ISO 180 |
| Process Conditions | |||
|---|---|---|---|
| Typical processing conditions | Nominal value | Unit | Test method |
| Melt temperature | 240~270 | ℃ | |
| Barrel temperature | |||
| Front section | 250~270 | ℃ | |
| Middle section | 240~260 | ℃ | |
| Posterior segment | 240~250 | ℃ | |
| Injection molding speed | 中高速 | ||
| Dry conditions | 110~130℃，3~5h | ||
| Mold temperature | 50~80 | ℃ | |
| Back pressure | 5~10 | Mpa | |
| Processing upper limit temperature | 290 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |