| About |
|---|
| Product Description | |
|---|---|
| Supplier | Zhetie Daphoon |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| 20℃ | 1.2 | g/cm³ | ISO 1183 |
| Transmittance | |||
| 2 mm | ≥89 | % | ASTM D1003 |
| Melt Flow Rate | |||
| 300℃，1.20kg | 9-11 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Yield stress | |||
| 50mm/min | ≥65 | Mpa | ISO 527-1-2 |
| Tensile strain | |||
| Fracture, 50 mm/min | ≥105 | % | ISO 527-1/2 |
| bending strength | |||
| 2 mm/min | ≥85 | Mpa | ISO 178 |
| Bending modulus | |||
| 2 mm/mim | ≥2350 | Mpa | ISO 178 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Scorched particles/yellow particles/foreign objects | ≤1 | 粒 | 放大镜目测 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，4mm | ≥65 | kJ/m² | ISO 180-4A |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |