| About |
|---|
| Product Description | |
|---|---|
| Supplier | Zhetie Daphoon |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| Appearance before testing | Nominal value | Unit | Test method |
| Lab chromaticity b value (natural color), CIELab | -3.5±0.7 | ASTM D2244 | |
| Scorched particles/yellow particles/foreign objects (particles/kg) | ≤1 | 粒 | 放大镜目测 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.2 | g/cm³ | |
| Melt Flow Rate | |||
| 300℃，1.20kg | 10±1 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile yield stress | |||
| 50mm/min，75mm | 62 | Mpa | ISO 527-1-2 |
| Tensile strain | |||
| Fracture, 50 mm/min, 75 mm span | ≥105 | % | ISO 527-1/2 |
| bending strength | |||
| 2 mm/min | 93 | Mpa | ISO 178 |
| Tensile modulus | |||
| 2 mm/min | 2300 | Mpa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，4mm | ≥700 | J/m | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |