| About |
|---|
| PEARLCOAT® 161K is a polyether-based TPU, supplied in form of translucent, colourless pellets, offering adequate hardness, excellent low-temperature flexibility and very good hydrolysis resistance. PEARLCOAT® 161K is used in melt coatings on textile substrates, for end-uses in industrial coatings (for life-jackets, etc.) obtained by extrusion and calendering.&& |
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Generic | TPU-醚 |
| Material Status | Commercial: Active |
| Features | Good flexibility,High elastic,Hydrolysis stability,Antimicrobial properties,Halogen free,Flame Characteristics |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.09 | g/cm³ | ASTM D792 , DIN 53479 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 , DIN 53504 | ||
| yield | 25.0 | MPa | DIN 53504 |
| 100% strain | 4.00 | MPa | ASTM D412 , DIN 53504 |
| 300% strain | 7.00 | MPa | ASTM D412 , DIN 53504 |
| Tensile strain | |||
| fracture | 650 | % | ASTM D412 , DIN 53504 |
| tear strength | |||
| — | 70.0 | kN/m | ASTM D624 |
| — | 70 | kN/m | DIN 53515 |
| Compression deformation | ASTM D395 , DIN 53517 | ||
| 23℃，70 hr | 29 | % | ASTM D395，DIN 53517 |
| 70℃，24 hr | 45 | % | ASTM D395，DIN 53517 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -44.0 | ℃ | DIN 51007 |
| Melting temperature | 157 to 167 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 76 | ASTM D2240 , DIN 53505 | |
| Wear amount | 25.0 | mm³ | DIN 53516 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 90 to 100 | °C | |
| Drying time | 2.0 | hr | |
| Barrel 1 zone temperature | 149 to 160 | °C | |
| Barrel 2 zone temperature | 160 to 171 | °C | |
| Barrel 3 zone temperature | 168 to 179 | °C | |
| Barrel 4 zone temperature | 174 to 185 | °C | |
| Nozzle temperature | 174 to 185 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Temperature at which MFI = 10 g/10 min @ 21.6 kg, MQSA 111 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |