| About |
|---|
| Type : Pearlthane® 11T93 is a polycaprolactone copolyester-based thermoplastic polyurethane. Main Application : Injection Moulding Special Features : Combining hardness with excellent mechanical properties, including a low compression set value.&& |
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Generic | TPU-Capro |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.16 | g/cm³ | ISO 1183 |
| water content | |||
| MQSA 44 | <0.10 | % | Internal Method |
| Wear amount | 25 | mm³ | DIN 53516 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 197-207 | ℃ | ISO 11357-3 |
| Glass transition temperature | -47.20 | ℃ | ISO 11357-2 |
| Vicat Softening Temp |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 93 | ISO 868 | |
| tensile strength | 40 | MPa | DIN 53504 |
| Compression deformation | 25 | % | ASTM D395 |
| tensile strength | 9.00 | MPa | DIN 53504 |
| Tensile strain | 500 | % | DIN 53504 |
| tear strength | 120 | kN/m | DIN 53515 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 100 -110 | °C | |
| Drying time | 1-2 | Hr | |
| Injection temperature | |||
| Rear barrel temperature | 196 | °C | |
| Central temperature of the barrel | 199 | °C | |
| Barrel front temperature | 210 | °C | |
| Die temperature | 210 | °C | |
| Mold temperature | 35 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method Ba, Angle (Unnicked) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |