| About |
|---|
| Type: Pearlthane® D91T86 NAT 01 is a 88A – Aliphatic polycaprolactone based Thermoplastic Polyurethane (TPU). Main Application: Injection Moulding Special Features: Offers excellent colour stability upon UV exposure.&& |
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Generic | TPU |
| Material Status | Commercial: Active |
| Features | High elastic,Quick molding cycle,Aliphatic series,Low density |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.12 | g/cm³ | ISO 2781 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 110 | kN/m | ISO 34-1 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 88 | ISO 868 | |
| tensile strength | ISO 527-2/5A/500 | ||
| — | 34.0 | MPa | ISO 527-2/5A/500 |
| 100% strain | 6.00 | MPa | ISO 527-2/5A/500 |
| 300% strain | 9.00 | MPa | ISO 527-2/5A/500 |
| Tensile strain | |||
| fracture | 700 | % | ISO 527-2/5A/500 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 90 | °C | |
| Drying time | 2.0 | hr | |
| Dew Point | < -30 | °C | |
| Barrel rear temperature | 170 | °C | |
| Barrel middle temperature | 185 | °C | |
| Barrel front temperature | 180 | °C | |
| Nozzle temperature | 190 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method Ba, Angle (Unnicked) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |