| About |
|---|
| Type: Pearlthane® ECO D12T90E is a high performance bio-based thermoplastic polyurethane. With ca. 38% bio-based content. Main Application : Extrusion Special features : Very good flexibility at low temperatures and very good abrasion resistance.&& |
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Renewable resources,Good wear resistance |
| Availabilitys | North America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | ISO 2781 |
| Biomass content | 38 | % | ASTM D6866 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 527-2 | ||
| 500 mm | 39.0 | MPa | ISO 527-2/5A |
| 100% strain, 500 mm | 9.00 | MPa | ISO 527-2 |
| 300% strain, 500 mm | 25.0 | MPa | ISO 527-2 |
| tear strength | 120 | kN/m | ISO 34-1 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 1 second | 91 | ISO 868 | |
| Tensile strain | |||
| Fracture, 500 mm | 470 | % | ISO 527-2/5A |
| abrasion resistance | 35.0 | mm³ | ISO 4649-A |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 3.0 | hr | |
| Barrel 1 zone temperature | 190 to 200 | °C | |
| Barrel 2 zone temperature | 195 to 205 | °C | |
| Barrel 3 zone temperature | 200 to 210 | °C | |
| Barrel 4 zone temperature | 200 to 210 | °C | |
| Connector temperature | 205 to 215 | °C | |
| Nozzle temperature | 205 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type 5 |
| 3. Method Ba, Angle (Unnicked) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |