| About |
|---|
| Polyether block amide Pebax® 2533 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request, letters regarding USP Class VI compliance can be provided.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PA12弹性体 |
| Material Status | Commercial: Active |
| Features | Low coefficient of friction,Resistance to kink |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.00 | g/cm³ | ISO 1183 |
| Shrinkage rate | Internal Method | ||
| TD：4.0 mm，24 hrs | 0.80 | % | Internal Method |
| MD：4.0 mm，24 hrs | 0.50 | % | Internal Method |
| Water absorption rate | ISO 62 | ||
| 23℃，24hr | 1.2 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 0.40 | % | ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30℃ | 无断裂 | ISO 179 | |
| Charpy Unnotch Impact strength | ISO 179 | ||
| 23℃ | 无断裂 | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 58.0 | ℃ | ISO 306 |
| Melting temperature | 134 | ℃ | ISO 11357-3 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ISO 868 | ||
| Shaw’s A | 77 | ISO 868 | |
| Shore A, 15 seconds | 74 | ISO 868 | |
| Shaw’s D | 27 | ISO 868 | |
| Shore D, 15 seconds | 22 | ISO 868 | |
| tensile strength | |||
| fracture | 32.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | > 750 | % | ISO 527-2 |
| Bending modulus | 12.0 | MPa | ISO 178 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 55 to 65 | °C | |
| Drying time | 4.0 to 8.0 | hr | |
| Processing (melt) temperature | 180 to 240 | °C | |
| Mold temperature | 10 to 30 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |