Pellethane® 2102-90AE

About

Product Description
Supplier	Lubrizol Advanced Materials
Generic	TPU
Material Status	Commercial: Active
Features	Good flexibility,Soft

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20		ASTM D792
Shrinkage rate
MD	0.5-0.7	%
TD	0.5-0.7	%
Melt Flow Rate
224℃，1.2 kg	29	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	90-98		ASTM D2240
Shaw’s D	54-62		ASTM D2240
Tensile modulus
50% strain	8.41	MPa	ASTM D412
100% strain	10.3	MPa	ASTM D412
300% strain	20.7	MPa	ASTM D412
tensile strength	42	MPa	ASTM D412
Tensile strain	540	%	ASTM D412
tear strength	131	KN/m	ASTM D624
Compression deformation
22hr，25℃	25	%	ASTM D395
22hr，70℃	40	%	ASTM D395
Taber abraser
1000g, 1000 cycles	10	mg	ASTM D1044
Bending modulus	75.8	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	89.0	℃	ASTM D1525
Linear coefficient of thermal expansion	1.51E-4	mm/mm/℃	ASTM D696
Glass transition temperature	-39	℃	DSC

Process Conditions
Processing temperature	Nominal value	Unit	Test method
Molded melt temperature	213-216	℃
Extrusion-Melt temperature	193-210	℃

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.