Perfactory® R11

About
R5 and R11 is a liquid photopolymer that produces robust, accurate, and functional parts. The material offers superior chemical resistance, a wide processing latitude, and excellent tolerance to a broad temperature and humidity range during and after build. Parts created from R5 and R11 exhibit superior fatigue properties, strong memory retention, and high quality up-facing and down-facing surfaces. R5 and R11 also offers a good balance of properties between rigidity and functionality. Applications Aerospace, Animation and Entertainment, Architecture and Art, Automotive, Consumer Packaged Goods, Education, Electronics, Manufacturing, Sporting Goods, Toys Recommended Machines: Perfactory® 4 Standard with ERM, Perfactory® 4 Standard XL with ERM&&

About

R5 and R11 is a liquid photopolymer that produces robust, accurate, and functional parts. The material offers superior chemical resistance, a wide processing latitude, and excellent tolerance to a broad temperature and humidity range during and after build. Parts created from R5 and R11 exhibit superior fatigue properties, strong memory retention, and high quality up-facing and down-facing surfaces. R5 and R11 also offers a good balance of properties between rigidity and functionality. Applications Aerospace, Animation and Entertainment, Architecture and Art, Automotive, Consumer Packaged Goods, Education, Electronics, Manufacturing, Sporting Goods, Toys Recommended Machines: Perfactory® 4 Standard with ERM, Perfactory® 4 Standard XL with ERM&&

Product Description
Generic	SMMA
Material Status	Commercial: Active
Features	Good surface appearance,Moisture resistance,Fatigue resistance,Solvent resistance,Heat Stabilized
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Water absorption rate
balance	0.71	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	35	J/m	ASTM D256-A

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	85		ASTM D2240
Tensile modulus	1250 to 1510	MPa	ASTM D638
tensile strength	50.0	MPa	ASTM D638
Tensile strain			ASTM D638
yield	13	%	ASTM D638
fracture	8.0	%	ASTM D638
Bending modulus	2450	MPa	ASTM D790
bending strength	75.0	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.