Perfactory® WIC100G

About
The EnvisionTEC WIC100G resin has been formulated for the casting of model made on the Perfactory® market. The nano-wax content offers a clean burn out with the highest reproduction details. Wax casting is easy from the WIC100G resin when using a standard wax burn out cycle with a regular gypsum investment. During the burn out cycle, the nano-wax melts away first allowing the resin to burn off without excessive expansion or pressure from degassing which is a problem normally associated with polymer based materials during the burn out cycle. WIC100G is a photo cured hybrid resin system that produces the highest quality part details without sacrificing strength, ease of handling, and finishing. Highest quality detailed parts, excellent burn out properties, and high speed building allows the WIC100G to be optimal for use in Jewelry market for production of master patterns for direct investment casting. Applications Jewelry Recommended Machines: Aureus, Perfactory® 4 Mini with ERM, Perfactory® 4 Mini XL with ERM, Perfactory® 3 Mini Multi Lens&&

About

The EnvisionTEC WIC100G resin has been formulated for the casting of model made on the Perfactory® market. The nano-wax content offers a clean burn out with the highest reproduction details. Wax casting is easy from the WIC100G resin when using a standard wax burn out cycle with a regular gypsum investment. During the burn out cycle, the nano-wax melts away first allowing the resin to burn off without excessive expansion or pressure from degassing which is a problem normally associated with polymer based materials during the burn out cycle. WIC100G is a photo cured hybrid resin system that produces the highest quality part details without sacrificing strength, ease of handling, and finishing. Highest quality detailed parts, excellent burn out properties, and high speed building allows the WIC100G to be optimal for use in Jewelry market for production of master patterns for direct investment casting. Applications Jewelry Recommended Machines: Aureus, Perfactory® 4 Mini with ERM, Perfactory® 4 Mini XL with ERM, Perfactory® 3 Mini Multi Lens&&

Product Description
Generic	SMMA
Material Status	Commercial: Active
Features	Good Rigidity,Good surface appearance
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.32	g/cm³	ISO 1183
viscosity	0.004	Pa·s	DIN 1342

Supplementary information	Nominal value	Unit	Test method
Ignition Point	300	℃	DIN 53765

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	80		ISO 868
tensile strength	14.8	MPa	ISO 527-2
Tensile strain
fracture	6.3	%	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.