| About |
|---|
| UL 94V-0, excellent resistance to thermal deformation, reinforced with 15% fiberglass. Widely used in industries such as electronics, electronics, and automobiles, Such as connectors, spools, motor covers, toaster upper and lower covers, electric iron holders, lampshades, diesel filters, hot melt gun casings, distribution panel casings, headlight casings, igniter components, carburetor bodies, etc. |
| Product Description | |
|---|---|
| Supplier | Nan Ya |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile Strength | 132.3 | MPa | ASTM D638 |
| Flexural Modulus | 7644 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy notched Impact strength | |||
| 3.2 mm | 53.9 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| HDT | |||
| 1.82 MPa | 195 | ℃ | ASTM D648 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| insulation Strength | |||
| 3.2 mm | 23 | kV/mm | ASTM D-149 |
| Arc Resistance | 90 | sec | ASTM D495 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Mold Shrinkage | |||
| 3 mm | 0.4-1.0 | % | ASTM D-955 |
| Specific Gravity | 1.53 | ASTM D792 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |