PETILEN H5-21T

About
PETILEN H5-21T is a Low Density Polyethylene product. It can be processed by blow molding, film extrusion, or injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Additive/Masterbatch.&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Low liquidity
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.919 to 0.923	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	4.1 to 5.4	g/10min	ASTM D1238

optical performance	Nominal value	Unit	Test method
gloss	78		ASTM D2457
Haze	8.0	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.