| About |
|---|
| Application: Blow moulding (for medium size) detergent bottles, jerry can squeezable tubes jerry can for irritant cosmetics and chemicals&& |
| Product Description | |
|---|---|
| Generic | LDPE |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 to 0.922 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.59 to 0.81 | g/10min | ASTM D1238 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Film Quality | T | Internal Method | |
| Processing temperature | 150 to 160 | ℃ | |
| Swelling Ratio | 1.35 | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. ALKATHENE 36 |
| 3. ALKATHENE 7 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |