PETLIN LD C150Y

About
PETLIN LD C150Y is a low density polyethylene resin for general purpose and film applications. It is produced by the state-of-the-art DSM Stamicarbon tubular process. It contains antioxidant (BHT free), slip and antiblock additives. It is intended primarily for blown film process.&&

Product Description
GenericLDPE
Material StatusCommercial: Active
FeaturesGood Clarity,Good surface appearance,Good heat sealing,Smoothness,Good dissection,High anti-blocking,Low speed solidification point,Food contact compliance,Inoxidizability
AvailabilitysAsia Pacific

Technical Data
PHYSICALNominal valueUnitTest method
Density0.921g/cm³ISO 1183/A
Melt Flow Rate
190℃,2.16kg5.0g/10minISO 1133

MECHANICALNominal valueUnitTest method
friction coefficient0.10 ASTM D1894

filmNominal valueUnitTest method
film thickness
test25µm
film thickness150 to 60 µm 
Tensile modulus ISO 527-3
MD,25 µm202MPaISO 527-3
TD,25 µm224MPaISO 527-3
tensile strength ISO 527-3
MD, fracture, 25 µ m26.0MPaISO 527-3
TD, fracture, 25 µ m15.0MPaISO 527-3
Tensile strain ISO 527-3
MD, fracture, 25 µ m150%ISO 527-3
TD, fracture, 25 µ m610%ISO 527-3
Drop hammer impact
25 µm86gASTM D1709
Elmandorf tear strength ISO 6383-2
MD:25 µm80000NISO 6383-2
TD:25 µm30000NISO 6383-2

optical performanceNominal valueUnitTest method
gloss
45°,25 µm66 ASTM D2457
Haze
25 µm6.5%ASTM D1003

Process Conditions
ExtrusionNominal valueUnitTest method
Melt temperature145 to 165°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.