PETLIN LD M022X

About
PETLIN LD M022X is a low density polyethylene resin designed primarily for injection molding and masterbatch applications. It is produced by the state-of-the-art Clean Tubular Reactor production technology.&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Good surface appearance,Low speed solidification point,Food contact compliance
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.921	g/cm³	ISO 1183/A
Melt Flow Rate
190℃，2.16kg	22	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	82.0	℃	ISO 306
Melting temperature
DSC	105	℃	DIN 53765
Crystallization peak temperature
DSC	100	℃	DIN 53765
Fusion heat	122	J/g	DIN 53765

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	45		ISO 868
Tensile modulus	175	MPa	ISO 527-2
tensile strength			ISO 527-2
yield	8.00	MPa	ISO 527-2
fracture	7.00	MPa	ISO 527-2
Tensile strain
fracture	400	%	ISO 527-2

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	180 to 210	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.