| About |
|---|
| AZ764 is a block copolymer polypropylene intended for industrial application & thin wall applications. It has a high melt flow and formulated with nucleating agent and anti-static. Injection molding parts made from this resin exhibit good impact, high stiffness and good heat stability. Applications Crates Thin wall application Industrial application Electrical appliances&& |
| Product Description | |
|---|---|
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High impact resistance,High liquidity,Nucleation,Block Copolymer,Antistatic property,Heat Stabilized,HB |
| Availabilitys | Africa & Middle East |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D792-A |
| Melt Flow Rate | |||
| 230℃，2.16kg | 39 | g/10min | ASTM D1238 |
| Shrinkage rate | Internal Method | ||
| MD | 1.4 | % | Internal Method |
| TD | 1.7 | % | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -20℃ | 6.0 | kJ/m² | ASTM D256 |
| 23℃ | 9.0 | kJ/m² | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 119 | ℃ | ASTM D648 |
| Vicat Softening Temp | 150 | ℃ | ASTM D1525 2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 85 | ASTM D785 | |
| tensile strength | ASTM D638 | ||
| yield | 25.0 | MPa | ASTM D638 |
| fracture | 18.0 | MPa | ASTM D638 |
| Bending modulus | 1360 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 190 to 230 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |