| About |
|---|
| Apt for injection molding and raffia coating. Good stability during transformation processes and a great compatibility with the substratum in the raffia fabric coating. It is recommended for thin-wall items in injection. Applications: In injection: food, cosmetic and hygiene product containers, video and DVD cases, toys. In coating extrusion: Lamination or coating of raffia fabrics.&& |
| Product Description | |
|---|---|
| Supplier | Petroquim |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Excellent Processability |
| Availabilitys | Latin America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 40 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 34.0 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 6.0 | % | ASTM D638 |
| Bending modulus | 1400 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 20 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 90.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | 152 | ℃ | ASTM D1525 2 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Hopper temperature | 160 | °C | |
| Barrel rear temperature | 180 to 210 | °C | |
| Barrel middle temperature | 180 to 210 | °C | |
| Barrel front temperature | 180 to 210 | °C | |
| Mold temperature | 20 to 60 | °C | |
| Barrel 1 zone temperature | 180 to 210 | °C | |
| Barrel 2 zone temperature | 180 to 210 | °C | |
| Barrel 3 zone temperature | 180 to 210 | °C | |
| Barrel 4 zone temperature | 180 to 210 | °C | |
| Barrel 5 zone temperature | 180 to 210 | °C | |
| Nozzle temperature | 270 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |