Petrothene® GA502119X01

About
The Petrothene GA502 series of resins are pelletized linear low density polyethylenes for applications requiring excellent drawdown and toughness. These pelletized products offer excellent additive homogeneity, require no transfer equipment modification and facilitate clean and safe storage and handling. They can be used in either blown or cast film extrusion.&&

Product Description
Supplier	LyondellBasell
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good flexibility,Good dissection,Food contact compliance
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	38	µm
Secant modulus
1% secant, TD, 38 µ m	248	MPa	ASTM D882
1% secant, MD, 38 µ m	221	MPa	ASTM D882
tensile strength
TD, fracture, 38 µ m	24.8	MPa	ASTM D882
MD, fracture, 38 µ m	33.8	MPa	ASTM D882
Tensile strain
TD, fracture, 38 µ m	800	%	ASTM D882
MD, fracture, 38 µ m	750	%	ASTM D882
Drop hammer impact
38 µ m, blow molded film	120	g	ASTM D1709-A
tear strength
TD，38 µm	400	g	ASTM D1922
MD，38 µm	170	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
45 °, 38 µ m, blow molded film	60		ASTM D2457
Haze
38.1 µ m, blow molded film	12	%	ASTM D1003

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	191 to 218	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.