| About |
|---|
| Petrothene GA625662, a hexene LLDPE, pelletized rotational molding resin with excellent flow properties, can be used to produce a variety of objects such as toys, playground equipment, drums and agricultural and chemical storage containers. GA625662 exhibits excellent ESCR, low temperature impact strength and warp resistance. It is UV-stabilized and available in a 35-mesh powder as Microthene MP625662.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | High elastic,Good liquidity,low-temperature impact resistance,Hexene copolymers,High ESCR |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.935 | g/cm³ | |
| Melt Flow Rate | |||
| 190℃，2.16kg | 5.0 | g/10min | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |