Petrothene® GS710062

About
The PETROTHENE SELECT series of resins are pelletized, high performance hexene, linear low density polyethylenes for applications requiring superior strength and toughness. These products offer significant improvements in mechanical properties and excellent additive homogeneity without sacrificing processability compared to conventional Hexene LLDPE materials. GS 710 exhibits superior processability compared to competitive High Performance Hexene LLDPE materials. Applications include trash and can liners, commercial and industrial packaging, as well as consumer packaging. The PETROTHENE SELECT series resins offer enhanced film strength, drawdown, toughness and heat seal strength.&&

About

The PETROTHENE SELECT series of resins are pelletized, high performance hexene, linear low density polyethylenes for applications requiring superior strength and toughness. These products offer significant improvements in mechanical properties and excellent additive homogeneity without sacrificing processability compared to conventional Hexene LLDPE materials. GS 710 exhibits superior processability compared to competitive High Performance Hexene LLDPE materials. Applications include trash and can liners, commercial and industrial packaging, as well as consumer packaging. The PETROTHENE SELECT series resins offer enhanced film strength, drawdown, toughness and heat seal strength.&&

Product Description
Supplier	LyondellBasell
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good heat sealing,Good dissection,Food contact compliance,Ultra high toughness,Low density
Availabilitys	North America
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.924	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	25	µm
Secant modulus
1% secant, TD, 25 µ m, blow molded film	200	MPa	ASTM D882
1% secant, MD, 25 µ m, blow molded film	193	MPa	ASTM D882
tensile strength
TD, fracture, 25 µ m, blow molded film	41.4	MPa	ASTM D882
MD, fracture, 25 µ m, blow molded film	55.2	MPa	ASTM D882
Tensile strain
TD, fracture, 25 µ m, blow molded film	720	%	ASTM D882
MD, fracture, 25 µ m, blow molded film	580	%	ASTM D882
Drop hammer impact
25 µ m, blow molded film	600	g	ASTM D1709-A
tear strength
TD, 25 µ m, blow molded film	580	g	ASTM D1922
MD, 25 µ m, blow molded film	350	g	ASTM D1922

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.