Petrothene® NA209009

About
PETROTHENE NA 209-009 exhibits excellent processability, low warpage and a combination of softness and toughness desired for LDPE molding. Typical applications include automotive and medical items, toys, closures and lids. Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.&&

About

PETROTHENE NA 209-009 exhibits excellent processability, low warpage and a combination of softness and toughness desired for LDPE molding. Typical applications include automotive and medical items, toys, closures and lids. Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.&&

Product Description
Supplier	LyondellBasell
Generic	LDPE
Material Status	Commercial: Active
Features	Low warping,Excellent Processability,Good flexibility,Food contact compliance,Low density,Soft
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.925	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	23	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	54		ASTM D2240
Tensile modulus
1% cut, molded	221	MPa	ASTM D638
tensile strength
fracture	8.27	MPa	ASTM D638
yield	13.1	MPa	ASTM D638
Tensile strain
fracture	120	%	ASTM D638
Bending modulus	310	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	44.0	℃	ASTM D648
Embrittlement temperature	-50.0	℃	ASTM D746
Vicat Softening Temp	92.0	℃	ASTM D1525

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	163	°C
Barrel middle temperature	177	°C
Barrel front temperature	177	°C
Nozzle temperature	177	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.