| About |
|---|
| Petrothene NA217080 is a natural low density polyethylene resin selected by customers for use as primary insulation for coaxial cable applications. NA217080 has also been used as a base resin for compounding materials including gas-injected or chemically expanded insulation. Petrothene NA217080 meets the requirements of the following: ASTM D 1248, Type I, Class A, Category 3, Grade E3; Federal LP390C, Type II, Class L, Category 3, Grade 1.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 5.6 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 53 | ASTM D2240 | |
| tensile strength | |||
| fracture | 12.4 | MPa | ASTM D638 |
| yield | 10.3 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 550 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 276 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -76.0 | ℃ | ASTM D746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | |||
| 1 MHz | 2.28 | ASTM D1531 | |
| Dissipation factor | ASTM D1531 | ||
| 1 MHz | 4.0E-5 | ASTM D1531 | |
| 2 GHz | 4.0E-5 | ASTM D1531 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 138 to 149 | °C | |
| Barrel 2 zone temperature | 149 to 163 | °C | |
| Barrel 3 zone temperature | 191 to 204 | °C | |
| Barrel 4 zone temperature | 204 to 218 | °C | |
| Connector temperature | 204 to 218 | °C | |
| Melt temperature | 204 to 218 | °C | |
| Nozzle temperature | 204 to 218 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |