Petrothene® Select GS707062

About
The PETROTHENE SELECT series of resins are pelletized, high performance hexene, linear low density polyethylenes for applications requiring superior strength and toughness. These products offer significant improvements in mechanical properties and excellent additive homogeneity without sacrificing processability. Applications include trash and can liners, commercial and industrial packaging, as well as consumer packaging. The PETROTHENE SELECT series resins offer enhanced film strength, drawdown, toughness and heat seal strength.&&

About

The PETROTHENE SELECT series of resins are pelletized, high performance hexene, linear low density polyethylenes for applications requiring superior strength and toughness. These products offer significant improvements in mechanical properties and excellent additive homogeneity without sacrificing processability. Applications include trash and can liners, commercial and industrial packaging, as well as consumer packaging. The PETROTHENE SELECT series resins offer enhanced film strength, drawdown, toughness and heat seal strength.&&

Product Description
Supplier	LyondellBasell
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,Good heat sealing,Smoothness,Good dissection,High anti-blocking,Food contact compliance,Hexene copolymers
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.924	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.70	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	25	µm
Secant modulus
1% secant, TD, 25 µ m	200	MPa	ASTM D882
1% secant, MD, 25 µ m	193	MPa	ASTM D882
tensile strength
TD, fracture, 25 µ m	44.8	MPa	ASTM D882
MD, fracture, 25 µ m	58.6	MPa	ASTM D882
Tensile strain
TD, fracture, 25 µ m	680	%	ASTM D882
MD, fracture, 25 µ m	530	%	ASTM D882
Drop hammer impact
25 µ m, blow molded film	750	g	ASTM D1709-A
Elmandorf tear strength
MD，25 µm	350	g	ASTM D1922
tear strength
TD，25 µm	580	g	ASTM D1922

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	204 to 232	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.