PFLUON® 8800G

About
PFLUON PEEK POLYMER is a kind of special engineering plastic with the features of high-temperature resistance, self lubricating, easy processing and high mechanical strength.&&

Product Description
Supplier	PFLUON
Generic	PEEK
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Alkali resistant,Low coefficient of friction,Self-lubricating,Acidproof,High Heat Resistance,Inoxidizability,Fatigue resistance,Good wear resistance,Grease resistance,Resistance to the steam,Rigid-tough balance,Heat Stabilized,Hydrocarbons,Insulation
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.30	g/cm³	ISO 1183
Melt Volume Rate
380℃，5 kg	70.0	cm³/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	3700	MPa	ISO 527-2
tensile strength
23℃	110	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	25	%	ISO 527-2
Bending modulus
23℃	4300	MPa	ISO 178
bending strength
23℃	172	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	7.0	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	143	℃	ISO 11357-2
Melting temperature	343	℃	ISO 11357-3

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flammability level
1.6 mm	V-0		IEC 60695-11-10, -20

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.