| About |
|---|
| Plasmer l045BM/ l045NM is thermoplastic vulcanizate (TPV) in thermoplastic elastomer (TPE) family. Plasmer can be easily processed With general thermoplastic processing equipments. Plasmer provides an excellent combination of mechanical, thermal and chemical properties expected of conventional thermoset rubber. Flexible PVC, rubbers (CR, NBR, EPDM etc.) can be replaced With Plasmer. It is polyolefin based and completely recyclable. TPE is shear-depentent.&& |
| Product Description | |
|---|---|
| Supplier | HYUNDAI EP |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Renewable resources |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.950 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 48 | ISO 868 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 5.88 | MPa | ISO 37 |
| 100% strain | 1.47 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 600 | % | ISO 37 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |