Plaslube® PA6/10 BK

About
Plaslube® PA6/10 BK is a Polyamide 610 (Nylon 610) product. It can be processed by injection molding and is available in North America. Primary characteristic: flame rated.&&

Product Description
Generic	PA610
Material Status	Commercial: Active
Features	HB
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.07	g/cm³	ASTM D792
Water absorption rate
24hr	0.40	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	60.0	MPa	ASTM D638
Tensile strain
yield	100	%	ASTM D638
Bending modulus	2000	MPa	ASTM D790
bending strength	75.8	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	48	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	66.1	℃	ASTM D648
0.45 MPa, unannealed	175	℃	ASTM D648
Linear coefficient of thermal expansion
MD	7.9E-5	1/℃	ASTM D696

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+14	ohms	ASTM D257
Volume resistivity	1.0E+15	ohms·cm	ASTM D257

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	HB		UL 94

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.