Plaslube® PC / ABS 2110 BK

About
Plaslube® PC / ABS 2110 BK is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in North America. Primary characteristic: flame rated.&&

Product Description
Generic	PC+ABS
Material Status	Commercial: Active
Features	HB
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.14	g/cm³	ASTM D792
Melt Flow Rate
230℃，3.80kg	5.5	g/10min	ASTM D1238
Shrinkage rate
MD：3.2 mm	0.60	%	ASTM D955
Water absorption rate
24hr	0.10	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-40℃，3.2mm	370	J/m	ASTM D256
-30℃，3.2mm	480	J/m	ASTM D256
23℃，3.2mm	590	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	104	℃	ASTM D648
Linear coefficient of thermal expansion
MD	7.4E-5	1/℃	ASTM D696

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	53.1	MPa	ASTM D638
Tensile strain
yield	130	%	ASTM D638
Bending modulus	2340	MPa	ASTM D790
bending strength	82.7	MPa	ASTM D790
Rockwell hardness
R-level	115		ASTM D785

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.