| About |
|---|
| Plaslube® PC / ASA FR1508 UV是一种丙烯腈-苯乙烯-丙烯酸酯 + PC (ASA+PC)产品,。 它可以通过注射成型进行加工,在北美洲有供货。 特性包括: 阻燃/额定火焰 Flame Retardant 良好的抗紫外线能力 无卤素 紫外线稳定&& |
| Product Description | |
|---|---|
| Generic | ASA+PC |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Halogen free,Flame Characteristics,V-0 |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 260℃，5.0kg | 45 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.45 | % | ASTM D955 |
| Water absorption rate | |||
| 24hr | 0.24 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 190 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 98.9 | ℃ | |
| 1.8 MPa, unannealed | 96.1 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD | 7.2E-5 | 1/℃ | ASTM D696 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 110 | ASTM D785 | |
| tensile strength | |||
| yield | 64.8 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 4.0 | % | |
| fracture | 27 | % | |
| Bending modulus | 2590 | MPa | ASTM D790 |
| bending strength | 84.1 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |