Plaslube® PEEK CF10 TL15 HF

About
Plaslube® PEEK CF10 TL15 HF is a Polyetheretherketone (PEEK) product filled with carbon fiber. It can be processed by injection molding and is available in North America. Characteristics include: Flame Rated High Flow Lubricated&&

Product Description
Generic	PEEK
Material Status	Commercial: Active
Features	High liquidity,Lubricating,V-0
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.43	g/cm³	ASTM D792
Shrinkage rate
MD：3.2 mm	0.20	%	ASTM D955
Water absorption rate
24hr	0.15	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	64	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	299	℃	ASTM D648
Linear coefficient of thermal expansion
MD	1.1E-5	1/℃	ASTM D696

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+5	ohms·cm	ASTM D257

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	179	MPa	ASTM D638
Tensile strain
fracture	1.5	%	ASTM D638
Bending modulus	12400	MPa	ASTM D790
bending strength	262	MPa	ASTM D790
Rockwell hardness
R-level	118		ASTM D785

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	249	°C
Drying time	2.0 to 4.0	hr
Barrel rear temperature	360 to 388	°C
Barrel middle temperature	360 to 388	°C
Barrel front temperature	360 to 388	°C
Processing (melt) temperature	360 to 382	°C
Mold temperature	177 to 218	°C
Back pressure	0.345 to 0.689	MPa
Screw speed	50 to 100	rpm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.