Platamid® HX 2592

About
Platamid® HX 2592 is a specialty thermoplastic co-polyamide hot melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® HX 2592 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, and more). In addition, Platamid® HX 2592 also exhibits strong adhesion onto rigid and plasticized PVC as well as ABS, epoxy resin, PU etc. Dense layers of Platamid® HX 2592 are known to have barrier properties against PVC plasticizer migration. Platamid® HX 2592 is also characterized by a very high content of Bio based Carbon (80%), making it a bio based solution to difficult-to-solve bonding problems.&&

About

Platamid® HX 2592 is a specialty thermoplastic co-polyamide hot melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. Platamid® HX 2592 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, and more). In addition, Platamid® HX 2592 also exhibits strong adhesion onto rigid and plasticized PVC as well as ABS, epoxy resin, PU etc. Dense layers of Platamid® HX 2592 are known to have barrier properties against PVC plasticizer migration. Platamid® HX 2592 is also characterized by a very high content of Bio based Carbon (80%), making it a bio based solution to difficult-to-solve bonding problems.&&

Product Description
Supplier	Arkema
Generic	PA Copolymer
Material Status	Commercial: Active
Features	Renewable resources,Good bond,Copolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.09	g/cm³	ISO 1183
Melt Volume Rate
160℃，2.16 kg	24.0	cm³/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Melting temperature	106	℃	ISO 11357-3

Supplementary information	Nominal value	Unit	Test method
Renewable Carbon Conent	80	%	ASTM D6866

Notes
1. Typical properties: these are not to be construed as specifications.
2. 10°C/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.