About |
---|
PLEXIGLAS® Film 0F008 is a transparent, glossy and weather resistant acrylic film for outdoor applications. Due to its excellent performance under long term weathering and UV light exposure, PLEXIGLAS® Film 0F008 does not present color change or yellowing. Therefore it provides an excellent protection of plastic substrates from degradation caused by UV wave lengths. Application PLEXIGLAS® Film 0F008 is suitable as top layer for UV and weathering protection of polymeric substrates, especially for PVC decoration films.&& |
Product Description | |
---|---|
Supplier | ROHM |
Generic | PMMA |
Material Status | Commercial: Active |
Features | Weather resistance is good,Good surface appearance,Good Printability |
Availabilitys | Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.13 | g/cm³ | DIN 53479 |
surface tension | 50 | mN/m | DIN 53364 |
film | Nominal value | Unit | Test method |
---|---|---|---|
tensile strength | |||
yield | 33.0 | MPa | ISO 527-3 |
Tensile strain | ISO 527-3 | ||
yield | 6.0 | % | ISO 527-3 |
fracture | > 50 | % | ISO 527-3 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Glass transition temperature | 91.0 | ℃ | ISO 11357-2 |
optical performance | Nominal value | Unit | Test method |
---|---|---|---|
Refractive index | 1.490 | ISO 489 | |
Transmittance | 92.0 | % | ISO 13468-2 |
UV Transmittance – 280 – 380 nm | < 1.0 | % | DIN EN 410 |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Accelerated weathering resistance | |||
method A,cycle 1,65% RH | No Visible Change | ISO 4892-2 |
Notes |
---|
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |