PLEXIGLAS® Film 0F040

About
PLEXIGLAS® Film 0F040 is a high weather resistant, glossy, and transparent acrylic film for outstanding graphic printings and laminations. Due to its excellent performance under weathering and UV light exposure, PLEXIGLAS® Film 0F040 does not present color change or yellowing. Therefore it provides high protection of laminating systems from degradation caused by UV radiation. Its glossy and very smooth surface leads the film to have an excellent optical quality surface. Application Due to its good optical property and lamination behavior with pressure sensitive adhesive (PSA), PLEXIGLAS® Film 0F040 can be used as single face layer or clear overlay in laminate systems for high UV and weathering protection such as labels, adhesives, tapes and graphic arts. PLEXIGLAS® Film 0F040 is also recommended for traffic control signs under long term outdoor application. PLEXIGLAS® Film 0F040 can be used to be printed on as a high quality film decoration and then laminated on different polymeric films and sheets. Laminated decoration films based on PLEXIGLAS® are suitable for a wide range of molding processes such as thermoforming, and insert molding.&&

About

PLEXIGLAS® Film 0F040 is a high weather resistant, glossy, and transparent acrylic film for outstanding graphic printings and laminations. Due to its excellent performance under weathering and UV light exposure, PLEXIGLAS® Film 0F040 does not present color change or yellowing. Therefore it provides high protection of laminating systems from degradation caused by UV radiation. Its glossy and very smooth surface leads the film to have an excellent optical quality surface. Application Due to its good optical property and lamination behavior with pressure sensitive adhesive (PSA), PLEXIGLAS® Film 0F040 can be used as single face layer or clear overlay in laminate systems for high UV and weathering protection such as labels, adhesives, tapes and graphic arts. PLEXIGLAS® Film 0F040 is also recommended for traffic control signs under long term outdoor application. PLEXIGLAS® Film 0F040 can be used to be printed on as a high quality film decoration and then laminated on different polymeric films and sheets. Laminated decoration films based on PLEXIGLAS® are suitable for a wide range of molding processes such as thermoforming, and insert molding.&&

Product Description
Supplier	ROHM
Generic	PMMA
Material Status	Commercial: Active
Features	Weather resistance is good,Good surface appearance,Optical performance,Good Printability
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.17	g/cm³	DIN 53479
surface tension	50	mN/m	DIN 53364

film	Nominal value	Unit	Test method
tensile strength
yield	58.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
yield	6.0	%	ISO 527-3
fracture	> 25	%	ISO 527-3

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	113	℃	ISO 11357-2

optical performance	Nominal value	Unit	Test method
Refractive index	1.490		ISO 489
Transmittance	92.0	%	ISO 13468-2
UV Transmittance – 280 – 380 nm	< 1.0	%	DIN EN 410

Supplementary information	Nominal value	Unit	Test method
Accelerated weathering resistance
method A，cycle 1，65% RH	No Visible Change		ISO 4892-2

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.