PLEXIGLAS® Film White 99532

About
PLEXIGLAS® White 99532 and White 99547 Light Scattering Films are based on impact-modified polymethyl methacrylate and offer an ideal combination of transmission and light diffusion. The key properties compared to other materials suitable for illumination purposes are the pure white color, fewer inclusions, extreme weatherability and UV resistance. In addition, these films with two high-gloss surfaces have good resistance to weak acids and alkalis as well as to non-polar solvents. Applications PLEXIGLAS® White 99532 and White 99547 Films are universally applicable wherever light scattering is required. Their high transmission combined with superior diffusion provide bright surfaces even with weak light sources.&&

About

PLEXIGLAS® White 99532 and White 99547 Light Scattering Films are based on impact-modified polymethyl methacrylate and offer an ideal combination of transmission and light diffusion. The key properties compared to other materials suitable for illumination purposes are the pure white color, fewer inclusions, extreme weatherability and UV resistance. In addition, these films with two high-gloss surfaces have good resistance to weak acids and alkalis as well as to non-polar solvents. Applications PLEXIGLAS® White 99532 and White 99547 Films are universally applicable wherever light scattering is required. Their high transmission combined with superior diffusion provide bright surfaces even with weak light sources.&&

Product Description
Supplier	ROHM
Generic	PMMA
Material Status	Commercial: Active
Features	Weather resistance is good,Alkali resistant,High impact resistance,Acidproof,Solvent resistance
Availabilitys	Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Pencil hardness	1H		ASTM D3363

film	Nominal value	Unit	Test method
Tensile modulus	1950	MPa	ISO 527-3
tensile strength
yield	51.0	MPa	ISO 527-3
Tensile strain
yield	4.5	%	ISO 527-3

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	98.0	℃	ISO 306
Linear coefficient of thermal expansion
MD	1.1E-4	1/℃	DIN 53752-A
specific heat	1500	J/kg/℃

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+13	ohms	IEC 60093
Volume resistivity	> 1.0E+13	ohms·cm	IEC 60093
Dissipation factor			IEC 60250
100 Hz	0.040		IEC 60250
1 MHz	0.030		IEC 60250

optical performance	Nominal value	Unit	Test method
Transmittance			DIN 5036
500 µm	57.5	%	DIN 5036
1000 µm	44.5	%	DIN 5036

Supplementary information	Nominal value	Unit
Half-Value Angle – intensity
500.0 µm	41.5	°
1.00 mm	81.0	°

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.