PLEXIGLAS® Sheet Mutlicolored

About
Multicolored PLEXIGLAS® is a solid acrylic sheet material consisting of two or three layers. The individual layers can be transparent, translucent or opaquely colored. Combinations of these options are also possible. Our special manufacturing process offers the following variations, among others: one surface with a piano lacquer effect – smooth or satin surfaces a transparent intermediate layer a colored intermediate layer individual house colors Applications: – Kitchens (niche panels) Living rooms (wall design) Interior design in hotels, restaurants, offices…. Exhibition booths, furniture, store fixtures Façade construction Displays Illuminated shelves&&

About

Multicolored PLEXIGLAS® is a solid acrylic sheet material consisting of two or three layers. The individual layers can be transparent, translucent or opaquely colored. Combinations of these options are also possible. Our special manufacturing process offers the following variations, among others: one surface with a piano lacquer effect – smooth or satin surfaces a transparent intermediate layer a colored intermediate layer individual house colors Applications: – Kitchens (niche panels) Living rooms (wall design) Interior design in hotels, restaurants, offices…. Exhibition booths, furniture, store fixtures Façade construction Displays Illuminated shelves&&

Product Description
Supplier	ROHM
Generic	PMMA
Material Status	Commercial: Active
Features	Weather resistance is good,High impact resistance,Renewable resources,Good Hardness,Low molecular weight
Availabilitys	Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ISO 1183
Water absorption rate	38.0		ISO 62

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	15	kJ/m²	ISO 179/1fU

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	103	℃	ISO 306/B
Low temperature bending	330 x thickness
Maximum operating temperature	70	℃

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level
—	B2	DIN 4102
—	E	EN 13501-1

MECHANICAL	Nominal value	Unit	Test method
Ball hardness
H 961/30	175	MPa	ISO 2039-1
Tensile modulus	3300	MPa	ISO 527-2
tensile strength	72.0	MPa	ISO 527-2
Tensile strain
fracture	4.5	%	ISO 527-2

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.