| About |
|---|
| Polene EVA N 8038 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific or North America for blow molding, calendering, or injection molding. Primary attribute of Polene EVA N 8038: Low Temperature Resistant. Typical applications include: Consumer Goods Food Contact Applications Sheet&& |
| Product Description | |
|---|---|
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | High elastic,Antifreeze,Foaming performance |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.941 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.3 | g/10min | ASTM D1238 |
| Vinyl acetate content | 18.0 | wt% | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 37 | DIN 53505 | |
| tensile strength | |||
| fracture | 24.0 | MPa | ASTM D638 |
| yield | 4.50 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 820 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 62.0 | ℃ | ASTM D1525 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 130 to 180 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |