Polene LDPE S 1018

About
Polene LDPE S 1018 is a Low Density Polyethylene material. It is available in Asia Pacific or North America for injection molding. Important attributes of Polene LDPE S 1018 are: Good Processability Low Shrinkage Typical applications include: Additive/Masterbatch Caps/Lids/Closures Consumer Goods Engineering/Industrial Parts Food Contact Applications&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Excellent Processability,Good liquidity,Low contractility
Availabilitys	North America,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.916	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	20	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	82.0	℃	ASTM D1525
Melting temperature	100 to 110	℃	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	48		DIN 53505
tensile strength			ASTM D638
yield	9.50	MPa	ASTM D638
fracture	8.50	MPa	ASTM D638
Tensile strain
fracture	400	%	ASTM D638

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	170 to 210	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.