| About |
|---|
| PNT 0856/35是硅烷可交联PE复合物，可以与催化剂母料一起使用，以加速交联反应。可用于柔性交联管道。 应用： – POLIDAN® PNT 0856/35 可用于生产柔性软管、连接器管和需要高柔韧性及获准与水接触的用品。&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | XLPE |
| Material Status | Commercial: Active |
| Features | Good flexibility,Crosslinked,Low density |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.870 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，5.0kg | 1.5 | g/10min | ISO 1133 |
| Gel content | |||
| Crosslinking level | > 65 | % | EN 579 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 6.00 | MPa | ASTM D638 |
| tensile strength | > 20.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 400 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 50.0 | ℃ | ISO 306 |
| Thermal conductivity coefficient | |||
| 23℃ | 0.45 to 0.47 | W/m/K | Internal Method |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 150 to 200 | °C | |
| Barrel 2 zone temperature | 150 to 200 | °C | |
| Barrel 3 zone temperature | 150 to 200 | °C | |
| Barrel 4 zone temperature | 150 to 200 | °C | |
| Barrel 5 zone temperature | 150 to 200 | °C | |
| Head temperature | 200 | °C | |
| Nozzle temperature | 210 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |